The PSHLW 2-story lifting and moving mechanical parking space prototype produced by Jiangsu Fengye Parking System Co. , Ltd. has been installed and tested, and has passed the model test successfully. The garage is a two-story mechanical parking equipment, the equipment is mainly by the frame, up board, down board, lifting mechanism, lateral mechanism, security agencies, electrical control components. The garage is divided into 1 area, and the effect after parking is shown as follows:
PSHLW 2-story elevating and transversal mechanical parking access car principle is as follows: when the car storage, open the operator panel and select the corresponding empty car tray, for example: select the second parking space on the 2nd floor input: 202 press the“Confirm” button, the rotary pallet will rotate to the aisle, the 102 horizontal empty pallet will move to the 101 position, the 202 empty pallet will drop to the ground, the driver drives into the empty pallet, and stops at the proper position, completes the process of storing the car into the garage. On the ground floor, the driver drives the car directly into the empty pallet and stops at a suitable location, that is, the car is stored at the end. Go to the garage instead of going to the garage, open the operator panel and select the appropriate empty car pallet, take out the number of the parking space where the car is located as needed, then press the"Confirm" button and the car pallet drops to the ground, the driver put the car into storage and drove it out.
Features of major components Main steel frame system:
it is composed of H-steel as column, H-steel as crossbeam and longitudinal beam, which is connected by bolts to form three-dimensional steel frame system structure. The advantages of this structure are stability, reliability and easy assembly.
2. Lifting pallet: mainly by bending plate welding into the pallet steel frame system, the special corrugated plate and the pallet steel frame system through the bolt connection, corrugated plate zinc-plated mesa, its beautiful appearance, rust-proof, corrosion-proof performance is good, its role is to carry the car.
3. Bottom transversal system: mainly by bending plate welding into the tray steel frame system, the special corrugated plate and the tray steel frame system through the bolt connection, corrugated plate galvanized mesa, its appearance is beautiful, rust-proof, corrosion-proof performance is good, its role is to carry the car.
4. Anti-fall system: mainly consists of electromagnet, micro-switch, safety hook and safety bracket, to prevent the accidental fall of the lifting tray.
5. Electrical control system: all kinds of travel switch, limit switch, over-the-horizon switch, photoelectric switch and other control components of the control system, which mainly controls the parking equipment pallet movements, make the movement between the parking spaces in an orderly manner.
